Click image to view full size image
■ Application:
HP-ABox(DS,SST)-150 is Assorted Plastic Box of HP-DS.It is customized minipacking, mainly for MRO (Mainterance Repairness Operation ) market.The heat shrinkable tubing made by polyolefin, with adhesive lining for protecting splices from water and corrosion. Providing strain relief and against vibration in rugged environments, which excellently insulates and protects electronic connections. It offer long-term performance, easy installation, and a low installed cost, which is more reliable than conventional crimp terminals.
HP-ABox(DS,SST)-150 is Assorted Plastic Box of HP-SST.It is customized minipacking, mainly for MRO (Mainterance Repairness Operation ) market.Transparent insulation sleeve provides encapsulation,inspect, strain relief, and insulation.Pre-fluxed solder provides controlled soldering process.One piece design, it consists of transparent heat shrinkable sleeve and fluxed solder. Provides insulation and lower the installed cost. Color hot-melt glue on two ends of heat shrinkable tube, connecting wires to component terminals, such as motor tabs, connector pins, and switch terminals,it is very convenience to use the exact wire dimension.
■ Characteristics：
HP-DS:
●Shrink ratio 3:1
●Excellent conductivity property
●High transparency,High tensile strength
●Excellent stretch and mechanical damage resistance
●High elasticity keeps steady performance
●Water proof and moisture resistance
●Operating temperature :-55 ℃ ~ 125℃
●Minimum shrink temperature:80℃
●Minimum fully recovery temperature:130℃
HP-SST:
●Shrinkage ratio 2:1
●Waterproof for wiring splices
●Transparent sleeve provides precise inspection
●Easy control soldering process
●Minimum Shrink Temp. 60℃
●Minimum Fully Recover Temp.110℃
●Fully melt temperature of solder: 138℃
■ Technical Data:
HP-DS:
| Test Item | Characteristics | Test condition | |
|---|---|---|---|
| Unaged | Tensile strength | Min. 16MPa | Room temp |
| Elongation | Min.200% | ||
| Aged | Tensile strength | Min. 11.5MPa | 158℃/7 days |
| Elongation | Min. 100% | ||
Voltage withstand and breakdown |
Withstand 2.5KV for 1 minute and breakdown | Room temp. | |
| Voltage withstand and breakdown Voltage(Unaged) |
Withstand 2.5KV for 1 minute and breakdown at least half of unaged breakdown voltage | 158℃/7 days | |
| Copper corrosion | No corrosion of bare copper | 158℃/7 days | |
| Copper stability | No sign of degradation Min. Elongation 100% | 158℃7 days | |
| Cold bend | No crack | -30℃/4 hrs | |
| Maximum secant modulus (2%) | 250MPa | - | |
| Volume resistivity | Min. 1014Ω-cm | - | |
| Heat shock | No crack | 250℃/4 hrs | |
■ Technical Data:
HP-SST:
| Operating temperature | -55℃~125℃ |
| voltage Resistant | ＞600V |
| Protection type | IP67 |
| Volume Resistivity (Ω cm) | ≥10 15 |
| Dielectric Strength (KV/mm) | ≥25 |
■ Size:
| No. |
Part No. | Details | Color | PCS/ Set |
|---|---|---|---|---|
| 1 | HP-ABox(DS,SST)-150 | HP-DS-06-1.25 | Red | 30 |
| 2 | HP-DS-06-2 | Blue | 30 | |
| 3 | HP-DS-06-5.5 | Yellow | 15 | |
| 4 | HP-SST-105-02 | Red | 30 | |
| 5 | HP-SST-105-03 | Blue | 30 | |
| 6 | HP-SST-105-04 | Yellow | 15 | |
| TOTAL | 150 | |||
Other sizes are available upon request.
■Color:
Standard color: Red, Blue,Yellow.
